How to prevent damage to oral liquid filling machines

How to prevent damage to oral liquid filling machines
The oral liquid filling machine is suitable for small dose tincture, sugar filling, and capping processes in pharmaceutical factories. All contact components are made of 316L stainless steel or PTFE, with functions such as bottle free, no filling, frequency conversion, and speed regulation. The Haochao oral liquid filling machine is designed reasonably, has a simple structure, is easy to operate, and is equipped with a mechanical stop filling device when there are no bottles. It is a device with high sales in recent years.
Oral liquid filling machines are commonly used in pharmaceutical and other industries. What should be noted during installation? Actually, according to the oral liquid filling machine, you only need to pay attention to the following four points.
After purchasing the oral liquid filling machine first, be sure to check whether the technical information is complete and whether the machine is damaged during transportation. If there are any abnormalities, the supplier must be contacted promptly. Secondly, for the installation of the feed and discharge components, you only need to follow the outline diagram in the manual and make some adjustments.
The third point to note is that new lubricating oil should be added to each lubrication point of the oral liquid filling machine.
Then all you need to do is check the exercise results. Use the crank handle to rotate the machine and check if it is running in the correct direction (counterclockwise when facing the motor spindle). The machine must be protected and grounded to avoid the risk of electric shock.
Moreover, the oral liquid filling machine is an automatic machine, so it is necessary to unify the size of bottles, bottle cushions, and bottle caps that are easy to pull. Therefore, before starting the equipment, it is necessary to use a crank to rotate the machine to see if there are any abnormalities in its rotation, and it can be confirmed that it is normal before driving. When adjusting the machine, tools should be used correctly. It is strictly prohibited to use excessive tools or force to disassemble parts, in order to avoid damaging the parts or affecting the performance of the machine. Whenever adjusting the machine, be sure to tighten the loose screws and use a crank to turn the machine to see if its movement meets the requirements before it can work. The equipment must be kept clean, and it is strictly prohibited to have oil stains, liquid medicine, or glass debris on the machine to avoid damaging it. Therefore, the following points must be achieved:
(1) During the machine production process, the liquid medicine or glass fragments should be promptly removed.
(2) Before the shift, all parts of the machine surface should be cleaned once, and each activity department should add clean lubricating oil.
(3) It should be wiped once a week, especially in areas that are difficult to clean or blown with compressed air during normal use.