Correct operation procedures of filling machine equipment
1. Check before use Before use, make sure that the power plug of the charger is connected to the 380V power supply and the chassis is grounded. Ensure that the air pressure of the filling machine is normal. Check whether motor and bearing lubrication is required. It is strictly forbidden to operate without oil. Start the machine only after it is normal. Observe at the same time. Whether there are material chain plates on the conveyor belts of all liquid tanks, whether there are foreign matters on the conveyor belts, whether there are bottle caps on the storage cover rails, whether water, power and air sources are connected, and whether all liquid tanks have a material chain plate. Whether there are foreign objects on the conveyor belt, whether there are bottle caps, whether water, power and air sources are connected, and whether each fastener is connected. If the parts are loose, ensure that the operation of each part is stable and wait patiently before normal use.
2. Check whether the safety equipment operates normally. Check whether the valve of the reaction tank is closely connected with the pipe of the filter unit, whether the filter cloth of the filter unit is damaged, and whether the cover is covered with fastening bolts to ensure that there is no leakage. Packing pressure. Check all connecting wires related to the filling machine to ensure that there are no damaged skin, short circuit and other defects.
3. Before starting the machine, whether there is water in all water tanks, whether the chain plate is fixed, whether there are sundries on the conveyor belt, whether there is a bottle cap in the storage box cover, water source, power connection air source and air source are ready for standby under various conditions. When the main power supply is turned on again, the power indicator is turned on, and the fault indicator and emergency stop indicator are turned off, the starting conditions are met. Press the start button on the control box, and then press the start switch at the charging point. The buzzer will sound three times. After the warning, the whole machine starts to work and enters the automatic working mode of cleaning, rinsing and filling. When the machine stops, press the stop button on the charging position and control box, and cut off the main power supply after stopping.
