With the continuous progress of production technology, consumers have higher and higher requirements for product packaging. All kinds of packaging equipment to improve the speed and beauty of product packaging came into being. As a new equipment, automated particle packaging machine has played an important role in the packaging of hardware, food and other fields. As a packaging equipment with advanced technology and stable performance.
1. what is a scale: the process of providing a standard weight to the weighing machine so that the weighing machine can recognize the weight signal is called a scale.
2. what is peeling: the process of measuring the weight of the weighing bucket by the weighing machine of the automatic particle packaging machine is called peeling.
3. how to scale: in the setting state, open the door of the electrical box, turn the second position of the red microswitch to on, put the weight into the scale bucket according to the value displayed on the display, turn the switch back to the bottom after 20 seconds, the display flashes to display the weight for 1 second, and then displays "-". After the scale is completed, take out the weight, and then perform the peeling operation.
4. how to peel: under the setting state of the automatic particle packaging machine, turn the red microswitch to the upper on, and the tare weight value will be displayed. After the number is stable, turn the switch back to the lower side, and the peeling is completed, and "-" will be displayed.
5. check whether the scale is correct: after peeling the scale, press the "set / weigh" key to enter the weighing state, put the scale weight into the scale bucket, and check whether the display is correct. If not, please scale again until it is correct.
6. when to carry out the scale: since there is a thermal stabilization process after the electronic components are powered on, the scale should be carried out 30 minutes after startup.
