Three in one filling machine for sour drinks
For ordinary edible liquid materials, such as milk, various wines, fruit juice drinks, carbonated drinks, etc., isobaric filling method and vacuum filling method can be used. However, considering the cost, isobaric filling method can effectively reduce the loss of Co2 in carbonated drinks, maintain the quality of aerated drinks, prevent excessive bubbling during filling, and ensure accurate filling measurement. The filling method of the three in one beverage filling machine can also be divided into two types: one is that the pressure in the liquid storage tank is equal to the pressure in the bottle, and the liquid is filled by flowing into the bottle with its own weight, which is called equal pressure filling; The other is that the pressure in the liquid storage tank is higher than the pressure in the bottle, and the liquid flows into the bottle by the differential pressure. The three in one carbonated beverage filling machine usually adopts the equal pressure method. It is also suitable for filling all kinds of liquid containing gas, such as beer, soda, champagne, etc.
Five advantages of the three in one carbonated beverage filling machine:
1. Improve the working efficiency of operators and equipment production;
2. The labor consumption of a single product is reduced, and the cost and time are reduced;
3. Reduce WIP in the process and truly realize "one flow";
4. Realize cell production on the basis of traditional production lines, improve production adaptability, and realize flexible production systems in response to market changes;
5. The three in one filling machine can be comprehensively applied to program analysis, action analysis, planning analysis, transportation analysis, time analysis and other methods to improve the overall quality of all staff and optimize the overall logic.
Usage of three in one carbonated beverage filling machine
Clean the tank first, then connect the high-pressure hose with the storage barrel, open the vent valve on the tank, and let the liquid containing steam flow into the tank. Close the vent valve when the liquid overflows. Then step on the pedal to hang the bottle, open the outlet valve, and close the outlet valve when the bottle is filled with liquid. Wait for a few seconds until the gas in the bottle is discharged, remove the bottle and fill it.
Production process of three in one carbonated beverage filling machine:
1. Bottle washing water: the bottle washing water is the water treated by the purified water treatment system and sent to the bottle washing machine for bottle washing.
2. Sterilization and capping of bottle caps: the bottle caps that meet the technical requirements for use are manually poured into the automatic sterilization cabinet of bottle caps. After a certain period of sterilization, they are manually sent into the capping machine, which arranges the disordered caps into the caps arranged in the same direction, and then sends the caps to the capping machine for capping.
3. Filling and capping of products: the materials are filled into the cleaned PET bottles through the filling system, and then become semi-finished products after being capped by the capping machine with the lidded bottle caps.
4. Post packaging of products: the semi-finished products after filling become finished products after labeling, shrinking, printing and film packaging, and then are warehoused after manual stamping or machine stacking.
