What are the precautions for powder packaging machine maintenance
The powder packaging machine is mainly developed and designed for ultra-fine powders that are easy to dust and require high-precision packaging. It completes two-speed filling, metering and lifting based on the signal given by a weight sensor installed under the container. It is suitable for automatic quantitative filling of powdery materials with average or poor fluidity in the pharmaceutical, food, chemical and other industries, such as powdered items such as medicinal powder, pollen, milk powder, flour, soybean powder, and camellia pollen. At present, with the rapid development of medicine, food and other industries, powder packaging machines have also ushered in better market opportunities.
The advanced automation mode not only effectively improves the production efficiency of the enterprise, but also better guarantees the packaging quality of the products. However, many companies often do not understand the importance and maintenance methods of machine maintenance. The powder packaging machine must pay attention to daily maintenance, because this can not only prolong the service life of the equipment, but also the equipment itself will not fail and so on. For the maintenance of the powder packaging machine, here are some suggestions for you:
1. Oil lubrication: It is necessary to regularly lubricate the meshing parts of the gears, the oil injection holes and the moving parts of the seat bearing. Once per shift, the reducer is strictly prohibited from running without oil. When adding lubricating oil, be careful not to put the oil tank on the rotating belt to prevent slipping off or premature aging of the belt.
Another point to note is that the reducer must not run without oil. After 300 hours of operation, clean the interior and replace with new oil, and then change the oil every 2500 hours of operation. When adding lubricating oil, do not drip oil on the drive belt, as this will cause the powder packaging machine to slip and lose or prematurely age and damage the drive belt.
2. Frequent cleaning: After shutdown, the metering part should be cleaned in time, and the body of the heat sealing device should be cleaned frequently, especially for some packaging materials with high sugar content in the particles, the turntable and the feeding door should be cleaned, and the body of the heat sealing device should also be cleaned. Parts that are cleaned frequently ensure that the sealing line of the packaged product is clear, and the scattered materials should be cleaned in time to facilitate the cleaning of the parts, thereby better prolonging their service life, and at the same time cleaning the electric control box often occurs dust. Prevents electrical failures such as short circuits or poor contacts.
3. Maintenance of the machine: The maintenance of the powder packaging machine is the key to prolonging the life of the packaging machine, so the screws of each part of the powder packaging machine should be checked frequently, and there should be no looseness. Otherwise, the normal remote rotation of the whole machine will be affected. The electrical part should pay attention to waterproof, moisture-proof, anti-corrosion, and rat-proof, and ensure that the electric control box and wiring terminals are clean to prevent electrical failures. Burn off the packaging material.
