What methods need to be mastered during the operation and debugging of the automatic labeling machine?

What methods need to be mastered during the operation and debugging of the automatic labeling machine?
1. Loosen the fixing screws
Adjust the screws on the reel box. First remove the plexiglass tray, and then adjust the area of the rear tray so that the area of the rear tray can meet the position of the paper box, and ensure that it is on the centerline of the paper tape. Tighten the screws, install the paper tray and the plexiglass front tray, and then fix the screws. After fixing, turn the paper reel to check whether its flexibility is good. If the carton is not flexible, you can adjust it accordingly to make it more flexible.
2. Sticker tape
Before wearing the label tape, we should check the rollers of the label tape to see if all rollers are flexible enough. If the rollers are not flexible enough, they must be adjusted to flexible before continuing. management.
In addition, the threading method of the automatic labeling machine should also pay special attention to the effective operation of the sticker through the sensor to ensure the normal operation of the equipment.
3. Test paste operation
After adjusting the equipment, we need to test paste and debug. You can put the bottle on the conveyor belt, adjust the bottle rod, adjust the distance, and then press the motor switch.
When the automatic labeling machine starts, we can use several bottles for labeling experiments. If the labeling effect can meet our requirements, then we can let the product system carry out the labeling process.