1. before use, please check whether the power plug of the charger is connected to the 380V power supply and whether the chassis is grounded. The filling machine adopts microcomputer control system and pneumatic control system with reliable performance, simple operation and simple maintenance. It effectively prevents the possible secondary pollution of pure water or mineral water during the filling process by carrying out the whole process of bottle washing, filling and capping in a closed state, so as to achieve the real aseptic filling. It is an ideal pure water / mineral water filling equipment in China at present. Ensure that the air pressure of the filling machine is normal. The filling machine adopts microcomputer control system and pneumatic control system with reliable performance, simple operation and simple maintenance. It effectively prevents the possible secondary pollution of pure water or mineral water during the filling process by carrying out the whole process of bottle washing, filling and capping in a closed state, so as to achieve the real aseptic filling. It is an ideal pure water / mineral water filling equipment in China at present. Check whether the motor and bearing need lubrication. The filling machine adopts microcomputer control system and pneumatic control system with reliable performance, simple operation and simple maintenance. It effectively prevents the possible secondary pollution of pure water or mineral water during the filling process by carrying out the whole process of bottle washing, filling and capping in a closed state, so as to achieve the real aseptic filling. It is an ideal pure water / mineral water filling equipment in China at present. It is strictly forbidden to run without oil. The machine can only be started after normal operation. Simultaneous observation. Whether there are material chain plates on the conveyor belts of all liquid storage tanks, whether there are foreign matters on the conveyor belts, whether there are bottle caps on the tank cover rails, whether there are water, electricity and air supply connections, and whether there are material chain plates on all liquid storage tanks. If the conveyor belt track is covered with foreign matters, if there are bottle caps, if there are connections of water, electricity and air supply, and if the fasteners are loose, ensure that all parts operate stably and wait patiently before normal use.
2. check whether the safety equipment operates normally. Check whether the valve of the reaction tank is tightly connected with the pipeline of the filter unit, whether the filter cloth of the filter unit is damaged, and whether the cover is covered with fastening bolts to ensure no leakage. Packaging pressure. Check all connecting wires related to the filling machine to ensure that there are no defects such as broken skin, short circuit, etc.
3. before starting the machine, check whether there is water in all water tanks, whether the chain plate is fixed, whether there are sundries on the conveyor belt, whether there are bottle caps in the storage box cover, and whether the water source, power wiring air source and air source are ready for standby under all circumstances. When the main power supply is started again, the power indicator light is on, and the fault indicator light and emergency stop indicator light are off, meeting the starting conditions. Press the start button on the control box, and then press the start switch of the charging point, and the buzzer will ring three times. After the alarm, the whole machine starts to work and enters the fully automatic cleaning, flushing and filling operation mode. After shutdown, press the charging position and shutdown button on the control box to cut off the main power supply after shutdown.
